The Canon Powershot ELPH 100 HS (IXUS 115 HS in Europe and Oceania, and sometimes known as the IXUS 117) was released in March 2011.
|
CHDK Beta versions for the Powershot ELPH 100 (Ixus 115 / Ixus 117) with firmware versions 1.00c, 1.01a, 1.01b and 1.01c are available from the CHDK Autobuild Server |
- → See also the specialities section
Reviews[]
Technical Data[]
→ Camera Specifications: [1] Canon AUS
- DIGIC IV image processor TruCapture
- DryOS operating system
- 12.1 megapixel High Sensitivity CMOS
- Lens: 28-112mm (35mm equiv), 4x optical zoom, F2.8-5.9
- Face Detection / 9-point AiAF
- Image stabilization (lens shift type)
- Display: 3.0 inch LCD, 230,000 pixels
- ISO: 100-3200
- Built-in flash
- Video: Yes 1920 x 1080 @ 24fps, 1280 x 720 @ 30fps, 640 x 480 @ 30fps, 640 x 480 @ 120 fps, 320 x 240 @ 30fps, 320 x240 @ 240 fps
- Video format: MOV (H.264 + Linear PCM (Mono))
- HDMI mini connector
- Storage: SD, SDHC, SDXC, MMC, MMCplus, HC MMCplus
- Power: Rechargable Li-ion Battery NB-4L
- Weight (without battery): 121g
- Dimensions: 93.1 x 55.9 x 19.9 mm
- Release Date: March 2011
Firmware info[]
Find your Camera Version by Using Camera Version Software on windows as seen here:
http://www.youtube.com/watch?v=08dlXYzc0qk
CHDK Specialties[]
This section describes special CHDK-related things...
- <Alt> mode is activated using the Playback button.
- Using the CHDK menu, <ALT> mode activation can be changed to the Video button or a combination of the FUNC/SET + ZOOM IN buttons.
.
Notes on SD Override for the ELPH100[]
SD overrides will only work when the camera is in AFL mode ( auto focus lock ). To activate AFL :
- The camera must be in Program mode rather than AUTO (slide switch on top of camera).
- You must be in normal Canon shooting mode (not CHDK <ALT> mode)
- Press the "left/flower" button after first "half pressing & holding" the shutter release button.
If you complete the above 3 steps correctly, you should see the Canon software put the letters AFL on the upper right edge of the LCD.
For Developers[]
General info[]
LED addresses[]
0xC0220130 green light on the back side
Firmware dumps[]
- firmware 1.00C by Just.J: zshare link (forum link: [2])
- firmware 1.01A: by kevdog32: dropbox link (forum link: [3])
- firmware 1.01C by dnw box link
|
Download location for firmware dumps: |
