CHDK is available for the Powershot A3200IS with firmware versions 1.00A, 1.00C and 1.00D from the Download page |
Reviews and Specifications[]
Technical Data[]
- Digic IV image processor
- DryOS operating system
- Sensor: 14.1 million effective pixels, 1/2.3" CCD type, size: 6.17 x 4.55 mm
- Max resolution (JPEG): 4320 x 3240
- 5x optical zoom lens 28-140mm (35mm equiv), F2.8 - F5.9, Image stabilization
- Display: 2.7 inch LCD, 230.000 pixels
- No optical viewfinder
- Native ISO: 80 - 1600
- Capturing speed: 0.9 fps in continuous mode
- Movie Recording: 1280 x 720 (30 fps), 640 x 480 (30 fps), 320 x 240 (30 fps)
- Movie codec: H.264 (Quicktime), monaural audio
- Power: Lithium-ion, Canon NB-8L
- Storage types: SD/SDHC/SDXC/MMC/MMCplus/HCMMCplus
- Weight: 149g (5.25 oz), without batteries: 130g (4.60 oz)
- Dimensions: 95.1 x 56.7 x 24.3mm (3.74 x 2.23 x 0.96 in)
Firmware info[]
The ver.req file method is used to gather firmware information about this camera model.
Note: Camera must not be set in Easy mode, or this method won't work.
Version 1.00B
ver.req First Page Data: After holding down FUNCSET then pressing DISP once:
Canon PowerShot A3200 IS P-ID:3224 PAL D Firmware Ver GM1.00A (1.0.0.0) Adj Ver.004.007 Serial No. XXXXXXXXXXXX
ver.req Second Page Data: After holding down FUNCSET then pressing DISP twice:
Canon PowerShot A3200 IS P-ID:3224 PAL D Build: Dec 13 2010 13:35:14 NoError
ver.req Third Page Data: After holding down FUNCSET then pressing DISP three times:
Canon PowerShot A3200 IS P-ID:3224 PAL D Mecha Firm Ver. 2.07 MechaDSP Firm. Ver. 1.03
Note: Using vers.req file instead, we get two additional screens.
vers.req Third Page Data: After holding down FUNCSET then pressing DISP three times:
Canon PowerShot A3200 P-ID:3224 PAL D Total Shoot: 0 Zoom Retry Count: 0 Mecha Condition: 0x00000000
vers.req Fourth Page Data: After holding down FUNCSET then pressing DISP four times:
Canon PowerShot A3200 P-ID:3224 PAL D Mecha Firm Ver. 2.07 MechaDSP Firm. Ver. 1.03 Driver Info: 0x00000000
CHDK Specialties[]
This section describes special CHDK-related things...
For Developers[]
General info:[]
- DryOS v2.3, release #0047
- FW start address: 0xFF810000
LED addresses:[]
0xC02200D4 = Flash 0xC02200F0 = Power (green, rear) 0xC02200F4 = AF Led
Available firmware dumps[]
- Firmware version 1.00A (by omdhar): dropbox dl link, forum link: [1]
- Firmware version 1.00C (by sanmaiwashi): download link, forum link: [2]
- Firmware version 1.00D (by 3dd): download link, forum link: [3]
Download location for firmware dumps: |